Go to content Go to search
Bathroom with light-colored laminate flooring, matching skirting, and a wooden stool next to a marble bathtub.

HOW TO FINISH
LAMINATE FLOORING

Finish your Quick-Step laminate in style

You’re now the proud owner of a luxurious new Quick-Step laminate floor. Want to add a stylish finishing touch with skirting boards and finishing profiles? Nothing could be simpler! You’ll find skirting boards and finishing profiles to match every design in the Quick-Step laminate range.

FINISH YOUR LAMINATE FLOORING

Close-up of a light-colored laminate floor with matching skirting and a wooden shelf holding neatly folded towels.

CONSULT AN EXPERT

Installer fitting skirting on a light-colored laminate floor.

Finishing your laminate floor

STEP 1: Install your skirting boards

Once you’ve selected the skirting boards to match your particular laminate floor, you can install them in just four quick and easy steps:

  1. Start by measuring the walls of your room from corner to corner.
  2. Use a circular saw to cut the skirting boards to the right angle.
  3. Apply a layer of glue evenly to each skirting board and then press it firmly in place.
  4. For a totally watertight finish, now add the Foamstrip, Hydrokit and Hydrostrip. These are compatible with all our laminate ranges, with the exception of the Largo collection.

Read more about waterproof finishing


Explore all skirtings

STEP 2: Add your finishing profiles

Finishing profiles are extremely useful: as well as helping to eliminate height differences between different floor levels, they also give you the chance to combine different types of flooring.

You’ll need to place them in every doorway if you have a floating floor, and they may prove to be necessary in larger rooms. But one thing is for sure, whether you opt for a perfectly colour-matched 5-in-1 Incizo profile or one of our aluminium profiles, you’ll find that installing your Quick-Step finishing profiles is very straightforward.

Explore our range of profiles

STEP 3:The finer details

Loving your room’s new look, with skirting boards and profiles all in place? It’s now time to focus on the finer details. Conceal unsightly radiators with our stylish radiator covers. Or why not use the Kit to fill in the places where it’s not possible to install skirting boards – but do be sure to avoid filling necessary dilatation joints by mistake.

Explore our finishing accessories

STEP 4:The last step

For a real five star makeover, why not add Quick-Step laminate stair covers to your stairs. Sounds complicated? Not at all – armed with just glue, tape measure and a circular saw and some basic DIY skills, this is all you need to do:

  • Completely remove the old floor covering from the stairs, and make sure the stairs are clean and level.
  • Measure the first stair, and then use a circular saw to cut your plank to the dimensions of its vertical side (the riser).
  • Glue the cut plank to the riser.
  • Place an aluminium profile on the top edge of the stair and screw firmly into place.
  • Measure the horizontal side of the stair (the tread), cut your plank to size and glue it down, making sure that it fits snugly against the riser.

And you’ve finished! Take a moment to admire your handiwork – and enjoy your stylish new interior.


Explore all stair profiles

A watertight finish in 5 easy steps

Installing a watertight floor is super easy. Follow the steps on the right for laminate that’s ready for splashes, humidity, and all the bathroom fun you could want. Even more, it can take a good cleaning too. All Quick-Step laminate floors are watertight, except the Largo collection. 

A gold underlay ready for waterproof flooring installation.
Step 1

Install your underlay.

Waterproof flooring installed with an expansion gap between the wall and floor.
Step 2

Install your watertight floor. Provide an expansion gap (8 to 10 mm) between walls and floor.

Foam strip applied between the wall and the floor.
Step 3

Install a foamstrip between the wall and your floor.

Applying hydrokit to the foam strip.
Step 4

Apply the hydrokit on top of the foamstrip.

Skirting board with hydrostrip installed to finish the floor.
Step 5

Install the skirting with the hydrostrip and finish up.

Still got questions?

Need help finishing your project to your satisfaction?
Take a look at our help centre, which contains answers to the most frequently asked questions!

Go to our help centre